Night Vision Outdoor Thermographic Telescope

●Do not use this product in a flammable, explosive, humid or corrosive environment.
●This product contains precision electronics and sensitive optical devices. Please do not make it collide or fall to avoid damage.
●Do not disassemble and refit this product without permission.
●Use wet cloth or weak soap to clean the casing of this product.
●Do not use abrasive, isopropanol or solvent. Use professional optical lens cleaning agent for the lens and screen.
●When the product works, there will be a slight click every few seconds. This is the sound of lens shutter, which is a normal case.
●Warning: Do not use the lens to look directly at the sun, which may damage the optical lens.

1. In the power off state, press and hold the Power button for power on.
2. In the power on state, press and hold the Power button to enter the menu.
3. In the menu state, shortly press the Power button to confirm to return to the previous menu, long press the Power button, and exit the menu.
4. In the power on state, short press the power button to take pictures.
5. In the power on state, turn the knob clockwise: color palette function switching: rainbow, hot metal, black heat, white heat, yellow saturation, bird view mode.
6. In the menu state, the knob is clockwise: select downward.
7. In the power on state, turn the knob counterclockwise: amplification function switching: 1x, 2x, 4x, 8x and 16x
8. In the menu state, turn the knob counterclockwise: to select
upward.

1. Long press the power button to enter the menu.
2. Turn the knob to shutdown selection, short press the power button to confirm the selection and shutdown.

1. Main menu: Long press the Power button to activate the main menu. Turn the knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm, select the Exit option to exit the main menu.
2. Color paletteselection: 6 color palettes. Turn the knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu.
3. Cursor switch: Turn the knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu.
4.  Cursor  type:  7  kinds  of  differentiation  lines.  Turn  the  knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu。
5. Pick up cursor calibration: 10 meters, 30 meters, 60 meters, 100 meters, 300 meters, 600 meters, and user defined. Turn the knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu.
6. Hot sport tracing: Turn the knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu.
7.  Zoom  in  button:   1x,  2x,  4x,  8x,   16x  times.  Turn  the  knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu.
8.Brightness selection: 10 levels (0-9). Adjust the brightness of the detector other than the  brightness of the  monitor. Turn the  knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu.
9.Contrast  selection:  10  levels  (0-9). Adjust  the  contrast  of  the detector  other  than  the  contrast  of  the  monitor.  Turn  the  knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu.
10.Image detail mode: Adjust the image edge or image details. Turn the knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu.
11.Image detail value: Turn the knob clockwise or counterclockwise for selection. Shortly press the Power button to confirm and return to the main menu.
12.Language selection: Turn the knob clockwise or counterclock- wise for selection. Shortly press the Power button to confirm and return to the main menu.
13.Cursor Calibration: The cursor switch must be on.
a. Select the knob clockwise or counterclockwise, and press the power button to confirm to enter the second-level menu.
b,  knobselection (10m, 30m, 60m, 100m, 300m, 600m, auto
Definition), short press the power button to confirm.
c. The knob adjusts the Y-axis cursor clockwise or counterclock- wise, short press the power button to switch to the X-axis cursor, and the knob adjusts the X-axis cursor clockwise or counterclockwise.
Short press the power button again to switch to theY-axis cursor, and  repeat this operation until the cursor coincides with the landing point.
d,  long press the power button to save and exit the current calibra- tion, and return to the second-level menu.
e, and then select other distance calibration, the steps are the same as above. After completing the calibration, select the Exit option to return to the main menu.
14. Firmware upgrade: when starting up, connect the device to your computer with USB cable and copy the name uconfig.bin upgrade file  to the device SD card, and then disconnect the USB cable. Turn the  knob clockwise or counterclockwise to select the “firmware upgrade” option, press the Power button to confirm, and the display screen  displays the YES character indicating that the upgrade is successful.  If it  is  not  successful,  please  repeat this  upgrade  step. After the  upgrade is successful, connect the device to the computer with USB,  and delete the upgrade file.
Do remember: The name and suffix type of the upgraded file cannot be changed, otherwise the upgrade will fail!
15. Power off: Turn the knob clockwise or counterclockwise, and shortly press the Power button to confirm the power off.
16.  Eyepiece  visibility  adjustment: Turn  the visibility  adjustment knob left and right to adjust the visibility that suits you.
17.Adjustable lens: Turn the adjustable lens left and right to focus. Clockwise rotation is near focus, and counterclockwise rotation is far focus.

This product has a built-in rechargeable battery. When the power is low, please charge it in time. There are two ways to charge it.
Charging method 1:
Charge the battery through the USB Type-C interface of the thermal imaging telescope, and unplug the USB cable after fully charged.
Charging method 2:
1. Unscrew the battery cover and remove the battery.
2. Use the original charger to charge the battery, and install the battery correctly according to the polarity instructions on the charger.
3 After fully charged, cut off the power of the charger and remove the battery.

Prompt: When this product lies idle for long, it shall be charged at least every three months to prevent irreversible loss of capacity due to too low battery power arising from its own discharge as it is kept too long.

1. Open the battery cover: Unscrew the battery cover counterclockwise.
2.Install the lithium battery: Put the battery into the battery compartment with the negative pole of the battery facing outward.
3. Install the battery cover: Tighten the battery cover clockwise.

The palette menu can change the pseudo color of the infrared thermal image, and provides 6 palettes: rainbow, hot metal, white heat, black heat, yellow saturation and birdwatching mode.
Choosing an appropriate palette can better display the details of the target object. For rainbow, the hot metal palette focuses on displaying colors, which is very suitable for high thermal contrast and is used to improve the color contrast between high and low temperatures.
However, the white hot palette provides uniform linear colors.

1. Only one of the image edges or image details can be selected for the adjustment to image quality.
2. If you want the image edge to be clearer and more stereoscopic, then select the image edge before selecting the corresponding value on the image detail value to make the image edge clear.
3. If you want the overall image quality to be clearer, select details, and then select the corresponding value on the image detail value to make the overall image quality clear.

1. Before use for the first time, mount the C7 product onto the equipment. As  customers  maintain  a  variety  of  equipment,  it  is necessary to complete the matched setting for the C7 product and the equipment. At different distances, the landing point and the C7 cursor  must  be  calibrated  consistently.  Select  the  landing  point distance  (10m,  30m,  60m,   100m,  300m,  600m  or  user-defined distance). Perform cursor calibration for each item. Please refer to the previous operation for cursor calibration.
Note: As the target distances are different and the coordinates of the cursor are not located at the same point, so it is necessary to select the calibration distance according to the distance so as to achieve the purpose that the landing point coincides with the C7 cursor and aims at the target more accurately.
2. During actual use, visually check the prey distance, for example, about 10m, and extract the cursor calibrated for 10m. At this time, the center position of the cursor is the center position of the prey. Aim directly according to the cursor of C7 product.
3. Visually check the prey distance, for example, about 100m, and extract the cursor calibrated for 100m. At this time, the center position of the cursor is the center position of the prey. Aim directly according to the cursor of C7 product.

When the SD card inside the machine is connected to the computer through USB to format the SD card, the SD card needs to be re-iden- tified when using the machine for the first time. This process takes 3~5 minutes, during which all keys cannot be operated. This is a normal appearance.

Dear our customer,
Thank you for having purchased our products. The warranty period of this product is from the date of sale.
During the warranty period, the productshall be installed and used   in accordance with the operation instructions under normalenviron-   ment and conditions. If the defective product is caused by raw materi-   als and processing process, you will be entitled to  free maintenance   service with the warranty certificate. You are kindly requested to keep   the warranty certificate properly, for there will be no reissue of it in the case of loss thereof.
To avoid problems in the process of application, we recommend   that you be familiar with the product manual before using the product.
Under any of the following circumstances, the product will not be covered by the warranty:
1. The original of valid warranty certificate fails to be presented;
2.  Damage  caused  by  product  installation  not  meeting  product requirements and relevant specifications;
3.  The  user's  improper  use  of  the  product,  improper  storage,
unauthorized  disassembly,  unauthorized  maintenance  and  other reasons.
4.  Damaged  caused  by  natural  disasters  (such  as  earthquake, flood or lightning strike), or external disasters (such as fire or house collapse).
1.The product is beyond the warranty period.
Cautions:
1. In case of any product failure, the product will be inspected and repaired or replaced with new or good products as the case may be;
2. For any products beyond the warranty period, it will be decided whether to repair or replace parts and components after product inspection, and charge related fees for various maintenance and replacement services.